Maximize Solids Recovery with The Help of The Dissolved Air Flotation Technique


In a number of industries, companies can create, as an inherent byproduct of their workflow, a number of different kinds of effluents. This waste needs to be properly disposed of following the various norms and regulations of waste disposal enforced by local and federal regulatory bodies. If you find your company in this scenario and are looking for the best way to dispose of wastewater properly, setting up some kind of a standalone wastewater treatment system can definitely be warranted. You need to set up the right system that can purify wastewater with repeatable accuracy, with every effort made to maximize solids recovery so that everything can go according to plan and you can remain compliant.


In a lot of use cases, it can be of interest to companies operating in the relevant industries to use some kind of treatment solution to treat wastewater. With proper treatment, not only can the water then be disposed of without a hitch or falling afoul of environmental regulations, but you can also opt to reuse the water in certain circumstances. To achieve this, it can be critically important to be able to achieve complete purification and maximize solids recovery. If you can find the right system for this, a lot can happen in terms of minimizing the impact on the environment and making the best possible use of all your resources.


If you are looking to establish such a system on your industrial plant or factory, one of the better tried and tested techniques of achieving good results while also being able to maximize solids recovery is a technique called DAF or dissolved air flotation. Through the use of DAF water treatment equipment, a high degree of efficient solids removal is possible. For this reason, this technique is a popular option in many water treatment systems where the aim is to maximize solids recovery and render the water safe to dispose or use again. You can use specialized dissolved air flotation equipment in order to gain the right results in line with your expectations.


The DAF or dissolved air flotation process usually takes place in specialized tanks, into which the wastewater that is about to be treated for solids removal is pumped in. Here, this water is mixed with another batch of water which has been treated so as to have a high concentration of dissolved air bubbles. The high saturation of dissolved air enables the solid to adhere to these air bubbles and eventually form a sludge on top of the liquid. A mechanism skims off this sludge and directs it to another container. By continuing this process, a high degree of solids recovery can become possible. Residual solids usually sink to the bottom of the tank and can be removed at the end of the process through a drain mechanism.


The high degree of solids recovery that can be possible with this method and the simplicity of this technique make this a popular option for many companies in industrial settings. In places where it can be important to be able to recycle and reuse the water, this solution can really start making sense quickly. DAF systems can be of many kinds and the right kind to choose depends on many factors, including the type of solids you want to recover, the area and scope of the operation, and the space available at hand to install the necessary structures and tanks. You can take a look at popular dissolved air flotation manufacturers and purchase a solution that can take care of your specific requirements.


Overall, investing in dissolved air flotation techniques and mechanisms can have a number of benefits. Recovering solids and purifying your wastewater can result in minimal impact for the immediate environment. It can also keep you well within the recommended compliance criteria for many businesses operating in the oil, food, and chemical industries. The use of this technique can yield consistent, reliable results you can definitely scale up or down with the passage of time as the need for water treatment increases or decreases. If you are operating in these industries, this can definitely be a step worth consideration for your wastewater treatment.


Leave a Reply

Your email address will not be published. Required fields are marked *